Swing Disc Check Valve
video

Swing Disc Check Valve

In a swing check valve, the flapper swings to allow fluid or gas to flow forward. When flow needs to be stopped, the flapper will swing back onto the valve seat, automatically closing the valve as system pressure decreases. Swing check valves are notable for their high flow rates.
Send Inquiry
Product Introduction

Swing check valve

In a swing check valve, the flapper swings to allow fluid or gas to flow forward. When flow needs to be stopped, the flapper will swing back onto the valve seat, automatically closing the valve as system pressure decreases. Swing check valves are notable for their high flow rates. Since these devices require an oscillating motion to work, their use is limited to horizontal flow or vertical upward flow.

The swing check valve is a popular check valve with a disc that is completely out of the way when the material is flowing. When not in use, the disc swings back into place over the pipe. This means that the swing check valve closes slowly. These valves are common in applications with high percent solids and low on/off cycle counts.

image001.jpg

Main Features

Bonnet/disc design for easy maintenance

Lip seal on disc ensures tightness

Lightweight disc requires minimal force to open and close the valve

The disc is able to move slightly and vertically to close completely and tightly

Hinges are bolted around the shaft to eliminate play for durability

Full bore ensures low head loss

image003

Swing check valves are by far the most common check valve in any industry. They are generally a lower cost solution and can be used in many horizontal flow applications. However, it is important to understand the differences between these types of check valves. In this article, we will cover some basic differences between these two types of in-line check valves. We also have a good introduction to the pros and cons of each approach.


Advantages and disadvantages

The most significant advantage of swing check valves is their low cost, which allows them to work within a wider range of project budgets. They also provide high traffic. Since the valve cannot support downward vertical flow, there are limitations on the types of systems it can serve. It's also worth noting that swing check valves are also more likely to amplify water hammer.


Application

Swing check valves are suitable for a variety of media, including liquids and gases. Some common use cases for swing check valves include fire protection equipment, flood protection in sewage systems, and toilet flush mechanisms.


Hot Tags: swing disc check valve, China swing disc check valve manufacturers, suppliers, factory, hydraulic cylinder check valve, check valve pvc, 1 2 non return valve, 316ss check valve, titan check valve, single flap check valve

Send Inquiry

Home

Phone

E-mail

Inquiry