Flat Gate Valve

Flat Gate Valve

Flat gate valves are particularly suitable for media with demanding sealing requirements in the chemical, petrochemical and steel industries.
Send Inquiry
Product Introduction

Flat gate valves are particularly suitable for media with demanding sealing requirements in the chemical, petrochemical and steel industries.


Product introduction

The flat gate valve is a sliding valve whose closing member is a parallel gate. The closing member can be a single gate plate or a double gate plate with a spreading mechanism in between, and the pressing force of the gate plate to the valve seat is controlled by the medium pressure acting on the floating gate plate or the floating valve seat. If it is a double gate flat gate valve, the opening mechanism between the two gates can supplement this pressing force.


Product category

The flat gate valve can be divided into manual flat gate valve, pneumatic flat gate valve and electric flat gate valve according to the driving mode. It can be divided into flat gate valve with diversion hole, flat gate valve without diversion hole, oil field flat gate valve, pipeline flat gate valve and gas flat gate valve according to the purpose and use occasion.


Structural features

This series of products adopts a new type of floating sealing structure, which is suitable for oil, natural gas and other pipelines with a pressure of not more than 15.0MPa and a temperature of -29 to 121 °C. Appropriate, strict testing, easy to operate, with strong anti-corrosion, wear-resistant, erosion-resistant properties, is an ideal new equipment in the petroleum industry.


Advantages

1. Adopt floating valve seat, two-way opening and closing, reliable sealing and flexible opening and closing.

2. The ram has guide strips for precise guidance, and the sealing surface is spray-welded with cemented carbide, which is resistant to erosion.

3. The valve body has high bearing capacity, and the channel is straight-through. When fully open, it is connected with the gate guide hole and is similar to a straight pipe, and the flow resistance is very small. The valve stem adopts composite packing and multiple seals, making the seal reliable and low friction.

4. When the valve is closed, turn the handwheel clockwise, and the gate moves down to the bottom. Due to the action of the medium pressure, the sealing seat at the inlet end is pushed toward the gate to form a larger sealing specific pressure, thereby forming a seal. At the same time, the gate is pressed against the sealing seat at the outlet end to form a double seal.

5. Due to the double seal, the wearing parts can be replaced without affecting the pipeline work. This is an important feature that our products have priority over similar products at home and abroad.

6. When opening the gate, rotate the handwheel counterclockwise, the gate moves, and the diversion hole is connected with the passage hole. As the gate rises, the through hole gradually increases, and when it reaches the limit position, the diversion hole coincides with the passage hole, and it is fully opened at this time.


Hot Tags: flat gate valve, China flat gate valve manufacturers, suppliers, factory, gate valve isolation valve, pprc gate valve, 35mm gate valve, 10mm gate valve, 2 5 hydrant gate valve, 30 inch gate valve

Send Inquiry

Home

Phone

E-mail

Inquiry